| Property | Value |
|---|
| rdf:type | |
| rdfs:label | - Błyskawica submachine gun
|
| rdfs:comment | - The Błyskawica (Polish for "lightning") submachine gun was designed and used by the Polish resistance movement during World War II. Its external layout was modeled after the MP-40, while most of internal mechanisms were copied from the Sten. Often produced in primitive conditions and without advanced tools, those weapons offered surprisingly good performance and reliability. It was used in Operation Tempest, the Warsaw Uprising, and in a number of smaller sabotage actions. Around 700 of them were built.
- In 1942 engineer Wacław Zawrotny proposed to the Armia Krajowa command that he and his colleagues prepare a project of a cheap, home-made machine pistol for use by the Polish resistance. Its main feature was to be a simple project, so that the weapon could be made even in small workshops, by inexperienced engineers. The idea was accepted, and Zawrotny, together with his colleague Seweryn Wielanier, prepared a project of a sub-machine gun, soon afterwards named Błyskawica (Polish for "lightning"). To allow for easier production, all parts of the weapon were joined together with screws and threads rather than bolts and welding, which were commonly used in firearm production ever since the 17th century.
- In 1942 engineer Wacław Zawrotny proposed to the Armia Krajowa command that he and his colleagues prepare a project of a cheap, home-made machine pistol for use by the Polish resistance. Its main feature was its simplicity, so that the weapon could be made even in small workshops, by inexperienced engineers. The idea was accepted, and Zawrotny, together with his colleague Seweryn Wielanier, prepared a project of a sub-machine gun, soon afterward named Błyskawica (Polish for "lightning"). To allow for easier production, all parts of the weapon were joined together with screws and threads rather than bolts and welding, which were commonly used in firearm production ever since the 17th century.
|
| owl:sameAs | |
| Era | |
| Length | |
| dcterms:subject | |
| dbkwik:guns/property/wikiPageUsesTemplate | |
| dbkwik:military/property/wikiPageUsesTemplate | |
| dbkwik:publicsafety/property/wikiPageUsesTemplate | |
| Number | |
| Range | |
| part length | |
| Velocity | |
| Origin | |
| Rate | |
| Platform | |
| Name | |
| Maker | |
| Type | |
| prod design date | |
| Cartridge | |
| Wars | |
| Weight | |
| Caliber | |
| Used by | |
| is ranged | |
| Target | |
| Action | |
| serv design date | |
| design date | |
| Magazine | |
| Variants | |
| Cycle | |
| Barrel | |
| feed | |
| Birth | |
| abstract | - In 1942 engineer Wacław Zawrotny proposed to the Armia Krajowa command that he and his colleagues prepare a project of a cheap, home-made machine pistol for use by the Polish resistance. Its main feature was its simplicity, so that the weapon could be made even in small workshops, by inexperienced engineers. The idea was accepted, and Zawrotny, together with his colleague Seweryn Wielanier, prepared a project of a sub-machine gun, soon afterward named Błyskawica (Polish for "lightning"). To allow for easier production, all parts of the weapon were joined together with screws and threads rather than bolts and welding, which were commonly used in firearm production ever since the 17th century. The design was based on two of the most popular machine pistols of the era. The external construction with a retractable butt and magazine mounted below the gun was borrowed from the successful German MP 40. The internal design of the mechanism was modeled after the British Sten. Blowback, with an open bolt, it offered good performance and high reliability. Unlike the Sten, and its Polish clone called the Polski Sten, it employed a free-floating firing pin. The Poles also designed the weapon this way so their insurgents could restock their ammo from dead German soldiers with MP 40s. The documentation was ready by April 1943, and by September a prototype was ready. After extensive tests in the forests outside of Zielonka near Warsaw, the weapon was presented to the commanding officer of the KeDyw, August Emil Fieldorf, who found the design acceptable. In November the plans were sent to a number of workshops spread throughout occupied Poland and a serial production started. The name was coined after the three lightning bolts carved on the prototype by its designers, pre-war workers of the Elektrit company that used a similar logo. The production started in a workshop officially producing metal fence nets in Warsaw. After the tests of a prototype series of five pistols, the KeDyw ordered 1000, and later an additional 300. Until July 1944 and the start of Operation Tempest roughly 600 pieces were built in Warsaw. During the Warsaw Uprising an additional 40 were built. It is also possible that the Błyskawica was also produced in small quantities outside of Warsaw.
- The Błyskawica (Polish for "lightning") submachine gun was designed and used by the Polish resistance movement during World War II. Its external layout was modeled after the MP-40, while most of internal mechanisms were copied from the Sten. Often produced in primitive conditions and without advanced tools, those weapons offered surprisingly good performance and reliability. It was used in Operation Tempest, the Warsaw Uprising, and in a number of smaller sabotage actions. Around 700 of them were built.
- In 1942 engineer Wacław Zawrotny proposed to the Armia Krajowa command that he and his colleagues prepare a project of a cheap, home-made machine pistol for use by the Polish resistance. Its main feature was to be a simple project, so that the weapon could be made even in small workshops, by inexperienced engineers. The idea was accepted, and Zawrotny, together with his colleague Seweryn Wielanier, prepared a project of a sub-machine gun, soon afterwards named Błyskawica (Polish for "lightning"). To allow for easier production, all parts of the weapon were joined together with screws and threads rather than bolts and welding, which were commonly used in firearm production ever since the 17th century. The design was based on two of the most popular machine pistols of the epoch. The external construction with a retractable butt and magazine mounted below the gun was borrowed from the successful German MP-40. The internal design of the mechanism was modelled after the British Sten. Blow-back, with an open bolt, it offered good performance and high reliability. Unlike the British Sten (and its Polish clone called Polski Sten) it employed a free-floating firing pin. The documentation was ready by April 1943, and by September a prototype was ready. After extensive tests in the forests outside of Zielonka near Warsaw, the weapon was presented to the commanding officer of the KeDyw, August Emil Fieldorf, who found the design acceptable. In November the plans were sent to a number of workshops spread throughout occupied Poland and a serial production started. The name was coined after the three lightning bolts carved on the prototype by its designers, pre-war workers of the Elektrit company that used a similar logo. The production started in a workshop officially producing metal fence nets in Warsaw. After the tests of a prototype series of five pistols, the KeDyw ordered 1000, and later an additional 300. Until July 1944 and the start of the Operation Tempest roughly 600 pieces were built in Warsaw. During the Warsaw Uprising an additional 40 were built. It is also possible that the Błyskawica was also produced in small quantities outside of Warsaw.
|
