Property | Value |
rdfs:label | - How can a Palm LifeDrive be disassembled
|
rdfs:comment | - Caution! This will probably void your warranty, and you may damage your unit or lose your data. Proceed at your own risk. You will want to perform a hot-sync and backup the Palm LifeDrive volume to your computer before attempting this. This will ensure that even if you need to buy a replacement LifeDrive if you ruin this LifeDrive, your data will be safe. 1.
* Turn off your LifeDrive, and slide the power switch into the Locked position. 2.
* Pry off the rubber feet. 3.
* Remove the screws and remove the bottom shell. 4.
* Remove the inner shell. 5.
* Remove the screws from the inner plastic frame and unplug the speaker wires from the motherboard 6.
* Lift away the plastic frame 7.
* Unplug the battery from the motherboard. 8.
* Unplug the microdrive
|
dcterms:subject | |
abstract | - Caution! This will probably void your warranty, and you may damage your unit or lose your data. Proceed at your own risk. You will want to perform a hot-sync and backup the Palm LifeDrive volume to your computer before attempting this. This will ensure that even if you need to buy a replacement LifeDrive if you ruin this LifeDrive, your data will be safe. 1.
* Turn off your LifeDrive, and slide the power switch into the Locked position. 2.
* Pry off the rubber feet. 3.
* Remove the screws and remove the bottom shell. 4.
* Remove the inner shell. 5.
* Remove the screws from the inner plastic frame and unplug the speaker wires from the motherboard 6.
* Lift away the plastic frame 7.
* Unplug the battery from the motherboard. 8.
* Unplug the microdrive from the CF interface. This question was asked on The HowTo Wiki.
|